CONSTRUCTION FEATURES

TCR-type machines, open-circuit evaporative towers with low-profile centrifugal fans, are built and assembled in accordance with our ISO 9001-certified quality system.

STRUCTURE & ASSEMBLY

The standard unit is constructed of sheet metal panels type Magnelis® (steel, zinc, aluminum, magnesium) panels to grant the maximum level of surface protection. Comparable empirically to a galvanized sheet with over 1000 g/m2 of zinc. The single panels, after the phase of cutting and folding, are assembled with AISI 304 (A2-70) on request AISI 316 (A4-80) e guarnizione in butyl mastic highly adhesive reinforced with polyester mesh inside to guarantee great shape stability and resistance to temperature variations. During the assembling of the structure, welding operations are not foreseen (self-supporting). The coloring of the sheet metal type Magnelis® is a RAL 9006.

WATER BASIN

Basin section is made with heavy thick panels of Magnelis® ZM310 thick and is equipped with a removable anti-cavitation type filter AISI 304L (to protect the primary circuit pump) and water make-up valve with brass/stainless steel body and stainless steel or polypropylene floating ball. Basin configuration permits water volume reduction and a lower weight when operating. Basin surface is sloping to permit complete drainage, emptying during maintenance and preventing then the growth of bacteria. All the unit connections are in galvanized steel (AISI 304L on request).

FILLING

The fill or exchange pack is made of PVC(PP upon request) with proprietary geometry design. The filling standard is type W1300 and on request, depending on the characteristics of the water to be used it can be type W2000 or for particularly dirty water filling W2700 is available. The geometry used is such that the heat exchange surfaces between air and water are maximized.

WATER DISTRIBUTION SYSTEM

Water is evenly distributed by a piping system inside the machine made of PVC with sheet metal distribution box Magnelis®. Spray nozzles are of suitable diameter to prevent any clogging and are made in ABS and easily replaceable in case of maintenance.

VENTILATION SYSTEM

(MOTORS + FANS)

Centrifugal fans, forward blades type, are made in galvanized steel statically and dynamically balanced. Fans are assembled on a painted steel shaft supported at both ends by self- aligning ball bearings, supports in cast iron. Protection fans grids in galvanized steel, are placed as for the most recent safety rule. The motors,efficiency class IE3, with IP55 mechanical protection, class F insulation, S1 continuous duty and B3 shape, are mounted on sturdy adjustable galvanized steel slides and placed in a weather-protected position. Motion transmission is by V-belts, calculated at 150 % of rated power. Motors are suitable to use together with frequency inverter (VSD-Inverter) 30-50 Hz. Electric motors are in accordance to the EU 2019/1781 norm. The terminals for power connection and the connection of any extras optional (anti-condensation heater and ptc thermistor) are inside the terminal box of the electric motor.

DRIFT ELIMINATORS

Drift eliminators are made in PVC (PP on request) and divided in various sections to facilitate their removal in case of replacement or inspection of ventilation and water distribution system. The used drift eliminators allow a passage of drops equal to 0.001% of the droplets present at the entrance, removing water loss, potential aerosols drift that might contain Legionella bacteria.

TEST

All components are supplied assembled. Each unit, prior to delivery, undergoes hydraulic testing to ensure that there are no water leaks in the tank, and electrical testing to verify that the electric motors have a power draw in line with the nameplate data.